Classic Style Stethoscope
Assembly & Installation Guide
Thank you for purchasing the Classic Style Stethoscope AirTag Holder. This holder is designed to securely mount an Apple AirTag to your stethoscope so you can easily track and locate it if misplaced.
Follow the steps below for proper assembly.
Step 1 – Position the Stethoscope Tube
Place the stethoscope tubing into the center channel of the holder base.
If the tubing fits snugly, the center insert shown in Picture 1 may not be required.
If the fit is loose, install the center insert to help secure the tubing and prevent movement.
Step 2 – Install the AirTag
Place the Apple AirTag into the circular recess in the base of the holder.
Ensure the AirTag sits flat inside the circular pocket.
Step 3 – Align the Top Cover
Place the top portion of the holder over the base.
The alignment pins on the top piece must match the holes in the base.
These alignment points are highlighted in Picture 2 (yellow circles) to help guide proper positioning.
Step 4 – Install the Screws
Insert the screws into the provided screw holes and tighten them until the holder is secure.
Do not overtighten, as excessive force may damage the 3D-printed components.
Support
If you experience any issues during assembly or have questions about installation, please contact us and we’ll be happy to help.
